Synthesis and Electronic Properties of Novel 5,7-Diazapentacene Derivatives

A route to the synthesis of novel 5,7-diazapentacenes and some preliminary studies on their properties is reported. A single crystal X-ray diffraction study of the dihexyl derivative showed it had formed a dimer during the analysis. The materials possess lower lying frontier orbitals than pentacene and may have potential applications in organic electronic devices. This synthetic method may be applicable to the synthesis of other azaacenes.     

Synthesis of μ2-Oxo-Bridged Iron(III) Tetraphenylporphyrin–Spacer–Nitroxide Dimers and their Structural and Dynamics Characterization by using EPR and MD Simulations

Iron(III) porphyrins have the propensity to form μ₂-oxo-dimers, the structures of which resemble two wheels on an axle. Whereas their crystal structure is known, their solution structure and internal dynamics is not. In the present work, the structure and dynamics of such dimers were studied by means of electron paramagnetic resonance (EPR) spectroscopy and quantum chemistry based molecular dynamics (MD) simulations by using the semiempirical tight-binding method (GFN-xTB). To enable EPR investigation of the dimers, a nitroxide was attached to each of the tetraphenylporphyrin cores through a linear and a bent linker. The inter-nitroxide distance distributions within the dimers were determined by continuous-wave (cw)-EPR and pulsed electron–electron double resonance (PELDOR or DEER) experiments and, with the help of MD, interpreted in terms of the rotation of the porphyrin planes with respect to each other around the Fe–O–Fe axis. It was found that such rotation is restricted to the four registers defined by the phenyl substituents. Within the registers, the rotation angle swings between 30° and 60° in the proximal and between 125° and 145° in the distal register. With EPR, all four angles were found to be equally populated, whereas the 30° and 145° angles are strongly favored to the expense of the 60° and 125° angles in the MD simulation. In either case, the internal dynamics of these dimers thus resemble the motion of a step motor.     

Oxidative dehydrogenation of n-octane over a vanadium–magnesium oxide catalyst: Influence of the gas hourly space velocity

Oxidative dehydrogenation (ODH) of n-octane was carried out over a vanadium–magnesium oxide catalyst in a continuous flow fixed bed reactor. The catalyst was characterized by ICP–OES, powder XRD and SEM. The catalytic tests were carried out at different gas hourly space velocities (GHSVs), viz. 4000, 6000, 8000, and 10,000 h^?1. The best selectivity for octenes was obtained at the GHSV of 8000 h^?1, while that for C8 aromatics was attained at the GHSV of 6000 h^?1 at high temperatures (500 and 550 °C). The catalytic testing at the GHSV of 10,000 h^?1 showed the lowest activity, while that at the GHSV of 4000 h^?1 consistently showed the lowest ODH selectivity. Generally, the best ODH performance was obtained by the catalytic testing at the GHSVs of 6000 and 8000 h^?1. No phasic changes were observed after the catalytic testing.     

Preparation and Characterization of a π-Conjugated Donor–Acceptor System Containing the Strongly Electron-Accepting Tetraphenylborolyl Unit

A novel thiophene-bridged donor–acceptor system was synthesized with a carbazole as donor and a borole as acceptor unit. The borole group was successfully installed via the tin–boron exchange reaction of 1,1-dimethyl-2,3,4,5-tetraphenylstannole with 9-(5-(dibromoboryl)thiophen-2-yl)carbazole. The effect of the borole on the optoelectronic properties of the donor–acceptor system was explored by spectroscopic (UV/Vis and fluorescence spectroscopy), electrochemical (cyclic voltammetry) and theoretical (TD-DFT) methods as well as by modifying its structure. The corresponding donor–acceptor compound bearing the widely employed dimesitylboryl acceptor group was also synthesized for comparison.     

基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上，采用电化学发光（ECL）和电化学阻抗（EIS）2种技术，协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明，DNA链中心位点的C-A单碱基错配稳定性低于链两端的，靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的，同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。     

A Stable Porphyrin Functionalized Graphite Electrode Used at the Oxygen Evolution Reaction Potential

Many researches have been devoted to rechargeable power generators that can store (but also release) energy. This availability is ensured through (e. g.) the oxygen evolution reaction (OER). However, (i) large values of the overpotentials and (ii) a progressive detriment of the anode (graphite) electrode limit the ultimate device. In view of enhancing the electrode performances, graphite was protected by following different strategies, which oblige to follow precise preparation protocols. Here, we prove that a thin layer of free-base porphyrin molecules is able to protect the underneath graphite electrode from detriment even if many (about 100) electrochemical cycles are performed.     

Li原子掺杂C28单分子器件的热自旋输运性质

利用第一性原理对Li原子掺杂C₂₈的分子器件的热自旋输运性质进行了计算。在不同的温度场下,上下自旋分别为Li原子掺杂C₂₈的分子器件中的空穴和电子提供了输运通道,在MJ₁和MJ₃分子器件中,热自旋电流随着温度增加而增大,但在MJ₂分子器件中,热自旋电流先增大再减小。三种分子器件都出现了自旋塞贝克效应,MJ₂还出现了负微分电阻现象,利用费米-狄拉克分布和自旋输运谱对其物理机理进行了解释。根据Li掺杂C₂₈的单分子器件的热自旋输运性质,可设计新的自旋纳米器件。     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.     

Deciphering Internal and External π-Conjugation in C3-Symmetric Multiple Azobenzene Connected Systems in Self-Assembly

Two tripodal C₃-symmetric photoswitchable molecular systems T1 and T2 are reported that have extended conjugation at external and internal positions using an acryl group. The influence of the extended π-bonds in their absorption properties, thermal relaxation of the photoisomers and their propensities in forming supramolecular self-assemblies have been explored through spectroscopy, and microscopic studies. In particular, the investigations on the self-assembly have been carried out using scanning electron microscopy (SEM), transmission electron microscopy (TEM), polarized optical microscopy (POM), X-ray diffraction studies (XRD) and atomic force microscopy (AFM). Remarkably, the position of the acryl group influences the behaviour of the two target molecules in supramolecular assembly, and also in the formation of photoresponsive organic hydrogels or microcrystals.     

Catalytic Nitrene Transfer by an FeIV-Imido Complex Generated by a Comproportionation Process

Nitrene transfer reactions have emerged as one of the most powerful and versatile ways to insert an amine function to various kinds of hydrocarbon substrates. However, the mechanisms of nitrene generation have not been studied in depth albeit their formation is taken for granted in most cases without definitive evidence of their occurrence. In the present work, we compare the generation of tosylimido iron species and NTs transfer from Fe^II and Fe^III precursors where the metal is embedded in a tetracarbene macrocycle. Catalytic nitrene transfer to reference substrates (thioanisole, styrene, ethylbenzene and cyclohexane) revealed that the same active species was at play, irrespective of the ferrous versus ferric nature of the precursor. Through combination of spectroscopic (UV-visible, Mössbauer), ESI-MS and DFT studies, an Fe^IV tosylimido species was identified as the catalytically active species and was characterized spectroscopically and computationally. Whereas its formation from the Fe^II precursor was expected by a two-electron oxidative addition, its formation from an Fe^III precursor was unprecedented. Thanks to a combination of spectroscopic (UV-visible, EPR, Hyscore and Mössbauer), ESI-MS and DFT studies, we found that, when starting from the Fe^III precursor, an Fe^III tosyliodinane adduct was formed and decomposed into an Fe^V tosylimido species which generated the catalytically active Fe^IV tosylimide through a comproportionation process with the Fe^III precursor.